GIGABYTE GEN3 2500E SSD 500GB

Key Features

 Form Factor: M.2 2280
 Interface: PCI-Express 3.0 x4, NVMe 1.3
 Total Capacity: 500GB*
 Sequential Read Speed: up to 2300 MB/s**
 Sequential Write speed: up to 1500 MB/s**
 HMB (Host Memory Buffer) supported
 TRIM & S.M.A.R.T support
 Energy-Efficient

Interface
PCIe 3.0×4, NVMe1.3 interface

Form Factor
M.2 2280

Total Capacity
500GB

External DDR Cache: N/A

Sequential Read speed
Up to 2300 MB/s

Sequential Write speed
Up to 1500 MB/s

Random Read IOPS
Up to 60K

Random Write IOPS
Up to 240K

Dimension
22 x 2.3 x 80 mm

Mean time between failure (MTBF)
1.5 million hours

Power Consumption (Active)
Average R: 2670mW
Average W: 3200mW

Power Consumption (Idle)
Idle: 30mW
L1.2 < 5mW

Temperature (Operating)
0°C to 70°C

Temperature (Storage)
-40°C to 85°C

Warranty
1. Limited for 3 years or 120TBW.
2. Limited warranty based on 3 years or 120TBW, whichever comes first. (*TBW is evaluated by JEDEC workload standard. )
*TBW (Terabyte Written): Terabytes Written is the total amount of data that can be written into an SSD before it is likely to fail
3. When the usage of an NVME SSD as indicated by the “Percentage Used” (SMART ID: 05) in a SMART page of the “GIGABYTE SSD toolbox” reaches 100 means out of warranty. (A new unused product will show the number of 0)

Note
Test system configuration: configuration may vary by model, we will choose the latest platform for verification.

Performance may vary based on SSD’s firmware version and system hardware & configuration. Sequential performance measurements based on CrystalDiskMark and IOmeter 1.1.0.

Speeds based on internal testing. Actual performance may vary.
1GB = 1 billion bytes. Actual useable capacity may vary.